nat共享80 443端口不能用于国内中转吗

szghc

在nat共享80 搭建了v2 直连可以 但是用国内中转就连不上

szghc

换443端口就正常了

cola

应该是你转发后没设置host伪装

jaaack

楼主的意思是在nat机搭了v2?  一般都是中转机配置的问题

Rayer

szghc 发表于 2020-3-22 14:06
2020/03/22 13:57:44 [Warning] v2ray.com/core: V2Ray 4.22.1 started
2020/03/22 13:57:49 tcp:127.0.0 ...

只要你的V2直连可以连上，只需要在NAT设置向443的端口转发就行了。本地的V2配置只需要把IP和端口改了其他保持一样就行

szghc

Rayer 发表于 2020-3-22 14:01
没配置好，我还拿443国内中转+套CF了，稳的一批

2020/03/22 13:57:44 [Warning] v2ray.com/core: V2Ray 4.22.1 started
2020/03/22 13:57:49 tcp:127.0.0.1:3479 accepted tcp:www.google.com.hk:443 [proxy]
2020/03/22 13:57:54 [Warning] failed to handler mux client connection > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [v2ray.com/core/transport/internet/websocket: failed to dial WebSocket > v2ray.com/core/transport/internet/websocket: failed to dial to (ws://xxxxxxxxxx:64565/): 200 OK > websocket: bad handshake] > v2ray.com/core/common/retry: all retry attempts failed
2020/03/22 13:59:26 tcp:127.0.0.1:3583 accepted tcp:i.ytimg.com:443 [proxy]
2020/03/22 13:59:35 [Warning] failed to handler mux client connection > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [v2ray.com/core/transport/internet/websocket: failed to dial WebSocket > v2ray.com/core/transport/internet/websocket: failed to dial to (ws://xxxxxxxx:64565/): 200 OK > websocket: bad handshake] > v2ray.com/core/common/retry: all retry attempts failed
这是日志  
是在中转机有额外配置 还是在nat建站的配置文件要改

dollaring

Rayer 发表于 2020-3-22 14:01
没配置好，我还拿443国内中转+套CF了，稳的一批

v2没搞明白，ssh占用一个，然后没没法添加了，请问怎么搞？谢谢

Rayer

没配置好，我还拿443国内中转+套CF了，稳的一批