全球主机交流论坛

标题: 小鸡失联了在vnc 的grub 救援页面，在线等！ [打印本页]

作者: log 时间: 2023-4-27 10:34
标题: 小鸡失联了在vnc 的grub 救援页面，在线等！
网上找了一些代码貌似没有用！

作者: xqdoo00o 时间: 2023-4-27 10:43
参考这 https://ooly.cc/archives/linux/361/ 用tftp下载netboot的efi

作者: log 时间: 2023-4-27 12:15

xqdoo00o 发表于 2023-4-27 10:43
参考这 https://ooly.cc/archives/linux/361/ 用tftp下载netboot的efi

进不了 FS0 的页面

只有shell的页面

作者: log 时间: 2023-4-27 13:05
现在能进fs0页面了

然后

FS0:\> tftp ip地址 netboot.xyz-arm64.efi netboot.xyz-arm64.efi
TFTP error code 256
Unable to get the size of the file 'netboot.xyz-arm64.efi' on 'eth0' - TFTP Error
FS0:\>

ip地址是我的另外一个小鸡把netboot.xyz-arm64.efi 放在root目录下了但是还是下不了啊

作者: aru 时间: 2023-4-27 13:06

log 发表于 2023-4-27 13:05
现在能进fs0页面了

然后

远程机器的 tftp 服务没开么
你用别的机器试试能不能tftp 下载

作者: log 时间: 2023-4-27 13:14

aru 发表于 2023-4-27 13:06
远程机器的 tftp 服务没开么
你用别的机器试试能不能tftp 下载

另外一个小鸡的配置是这样的

TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/tftpboot"
TFTP_ADDRESS="小鸡ip:69"
TFTP_OPTIONS="-l -c -s"

这里的address 对吗？是 0.0.0.0:69 还是我小鸡ip:69 ?

作者: aru 时间: 2023-4-27 13:18
本帖最后由 aru 于 2023-4-27 13:20 编辑

log 发表于 2023-4-27 13:14
另外一个小鸡的配置是这样的

TFTP_USERNAME="tftp"

用0.0.0.0 或者服务器的内网IP，不能用外网IP
或者直接是 TFTP_ADDRESS=":69"

文件要放在 /tftpboot 目录下

作者: log 时间: 2023-4-27 13:21
本帖最后由 log 于 2023-4-28 12:15 编辑

改成0.0.0.0

作者: log 时间: 2023-4-27 14:10
全部都装好了然后可以在甲骨文的CLoud shell 里root 进去Debian

但是我用termius 就无法连接, 用的是root跟密码

当时在甲骨文面板里创建的时候是 ubuntu 跟密码登录的

那现在用terminus咋登录？

作者: log 时间: 2023-4-27 14:19

log 发表于 2023-4-27 14:10
全部都装好了然后可以在甲骨文的CLoud shell 里root 进去Debian

但是我用termius 就无法连接, 用的是root ...

#    $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

Include /etc/ssh/sshd_config.d/*.conf

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#PubkeyAuthentication yes

# Expect .ssh/authorized_keys2 to be disregarded by default in future.
#AuthorizedKeysFile    .ssh/authorized_keys .ssh/authorized_keys2

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# Allow client to pass locale environment variables
AcceptEnv LANG LC_*

# override default of no subsystems
Subsystem    sftp /usr/lib/openssh/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#    X11Forwarding no
#    AllowTcpForwarding no
#    PermitTTY no
#    ForceCommand cvs server

欢迎光临全球主机交流论坛 (https://loc.mjj8.eu.org/)